🚨 Cub Cadet XT1 Engine runs fine but mower dies the second the blades are engaged

🛠️ The 60-Second Diagnostic Test

1. 1

   Check under the frame to ensure the reverse safety switch plunger is making full physical contact when the pedals are neutral.

2. 2

   Unplug the PTO wire harness and use a multimeter to check for continuity across the switch terminals while pulled out.

💡 The Quick Fix Steps

1. 1

   Clean corroded terminals with electrical contact cleaner, or unbolt and replace the failed reverse safety switch plunger.

2. 2

   Replug the harness securely, engage the blades on a dry surface, and verify the safety logic resets correctly.