🚨 Predator 3500 Inverter Generator Starts perfectly but shuts down completely after exactly 10 seconds

🛠️ The 60-Second Diagnostic Test

1. 1

   Unbolt the square metal exhaust access panel on the rear outer casing grid of the generator housing.

2. 2

   Pull out the tiny mesh screen bracket from the exhaust pipe; look through it to check if it is completely caked black.

💡 The Quick Fix Steps

1. 1

   Blast the carbon crust off the wire mesh screen using a wire wheel brush or a propane torch flame setup.

2. 2

   Reinsert the clean screen assembly back into the muffler snout tailpipe and securely fasten the retention screw.